Wiki » History » Version 69

Version 68 (Ken Lutz, 10/24/2016 11:52 AM) → Version 69/84 (Ken Lutz, 10/24/2016 11:58 AM)


# GDP Deployment Notes

## Data users email list created
If you would like to be notified of data anomalies or changes in the sensor actuator send an email to asking to be added to the email list,

## Conventions
Unless otherwise noted, the name of the corresponding logs are derived from the physical location (currently `bwrc` or `swarmlab`) and the lowercase MAC address:


For example, a sensor with MAC address `C0:98:E5:30:00:03` in the immersion room (which is in swarmlab) will be named `edu.berkeley.eecs.swarmlab.device.c098e5300003`

## Provisioning
See [[Provisioning Sensors]] for instructions on how to add new sensors.

## Configuring Gateways
See [[Configuring Gateways]] for information about setting up gateway hosts (typically either BBBs or SwarmBoxes).

## Visualization
A minimal visualization tool is [Here]( Note that the list of sensors is manually updated for the moment, so it may not show all the sensors listed below.

## Deployments

### BWRC Server Room

**Sensors and Gateways**

* BBB -
* Rear Wall BLEE - C0:98:E5:30:00:36
* Mid Wall BLEE - C0:98:E5:30:00:5D
* Hot Aisle BLEE- C0:98:E5:30:00:54
* Lab Rear Wall BLEE - C0:98:E5:30:00:09
* BLINK - C0:98:E5:90:00:1E
* Power Blade - Utility power to sump pump - C0:98:E5:70:00:8F
* Power Blade - Utility power to Air Compressor - C0:98:E5:70:00::90
* USB Microphone - mounted on BBB
* I3 Mesh root node
* I3 Sensor tag Mid Wall
* I3 Sensor tag, Lab rear wall

### BWRC Office Area

#### Sensors and Gateways

- Main seating area - C0:98:E5:30:00:A5
- Conference Room , Rabaey Room - C0:98:E5:30:00:A3
- Admin Office - C0:98:E5:30:00:A4
- Conference Room - Brodersen room - C0:98:E5:30:00:A2
- Ken's Office - C0:98:E5:30:00:A1
- Brian Office above thermostat - C0:98:E5:30:00:A0
- Center of student seating area, above thermostat - C0:98:E5:30:00:37
* Blink
- Brodersen Conference Room C0:98:E5:90:00:87
- Rabaey Conference room - C0:98:E5:30:00:94

**Operational Notes**

* 6-17-16 2:59PM Repaired broken Blink in server room. Was reading all zero, now detecting movement correctly.
* 7/11/16 Fixed powerblade on air compressor - was installed backward. Data collected after 7/11 looks correct. Prior was in error. Note that energy accumulated goes to zero when powerblade was disconnected for inspection. Good marker.
* 7/14/16 9:29AM Correlated spike in temperature and humidity for a short period of time across all BLEES in the server room. Probably related to someone working in the room and having propped the door open.
* 7/17/16-7/19/16: Missed about 2 days worth of data due to bug in the MQTT-gateway.
* 7/19/16 4:05 PM - 4:19PM: Put a cover over the Lab Rear wall BLEE causing the light level to go to zero. Temp and humidity are down as well.
* 7/19/16 4:20PM - 4:31PM: Put a cover over BLEE in server room, mid wall. Light level goes to zero, temp goes up. Other sensors in the server room do not show similar readings
* 7/25/16 - Added sensors and gateway to BWRC office area. New batteries
* 8/1/16 BBB004 down for maintenance 2-5pm.
* 8/8/2016 Replaced batteries in server room and Kens office
* 8/8/16 Removed test powerblade from air compressor outlet strip
* 8/26/16 9:40AM - 10:10am covered light sensor on BLEE in Ken's office - C0:98:E5:30:00:A1
* 8/26/16 11:42 - Covered light sensor on BLEE Center of student seating area, above thermostat - C0:98:E5:30:00:37
* 8/26/16 12:30 -12:45 (approx) increased humidity on BLEE Brian Office above thermostat - C0:98:E5:30:00:A0
* 8/26/16 2:41-2:47pm increased humidity on Rear Wall BLEE - C0:98:E5:30:00:36
* 9/16/16 11:41AM Replaced batteries in server room, Kens office, student area+
* 10/10/16 12:00 pm Senor tags deployed in server room and rear wall of lab

### Cory Hall Swarm Lab and Immersion Room
**Servers and Sensors**

#### Immersion Room

* Primary projector PowerBlade ~~C0:98:E5:70:00:2B~~ C0:98:E5:70:00:8D
* Secondary projector PowerBlade C0:98:E5:70:00:8B
* Speaker Camera PowerBlade C0:98:E5:70:00:8E
* Audience Camera PowerBlade C0:98:E5:70:00:88
* BLEE, rear camera pillar C0:98:E5:30:00:03
* Front wall adjacent to screen Blink C0:98:E5:90:00:0A

Chair BLEES C0:98:E5:30:0: {58, 5c, 5F, 7a, 7b, 74, 75, 76, 77, 78}

#### Entrance Lobby

* Swarm Lab Inside Entrance Lobby
* Blink C0:98:E5:90:00:0B
* BLEE C0:98:E5:30:00:0A

#### Office 490B


#### 4th floor Elevator Lobby

* Blink C0:98:E5:90:00:91
* SwarmBox

#### Exit Stair Door near 490

* Blink C0:98:E5:90:00:19

**Operational Notes**

- 7/12/16 2:59PM, powerblade on Speaker camera disconnected for inspection and reconnected. Note that accumulated energy goes to zero at this time.
- 7/13/16 10AM, powerblade on Immersion room primary projector re-installed, now in correct orientation. Readings from 10am on look correct.
- 7/14/16 9:22:58AM - Introduced an anomaly by heating the Immersion room BLEE located on the rear pillar with a hot air gun for about 4 min. Temperature and humidity impacted.
- 7/14/16 9:46AM - Speaker camera was left on since 7/12 2:26pm. Turned off at 7/14 9:46AM
- 7/15/16 - 9:40AM Primary projector powerblade seems to have a loose connection. No readings from 7/14 3:23PM until re-seated at 7/15 9:40AM
- 7/18/16 - 11:30AM BLEES installed on conference table chairs w/ new batteries
- 7/17/16-7/19/16: Missed about 2 days worth of data due to bug in the MQTT-gateway.
- 7/19/16: Beaglebone gateway is got powered off. Last data collected was around 4:56PM. Restarted at 10:50PM
- 7/20/16: Rear Camera pillar BLEE - Battery replaced 3:26PM
- 7/26/16 Main projector power blade failed - replaced with new unit (new MAC)
- 8/1/16 BBB001 down for maintenance
- 8/8/16 Batteries replaced in all sensors except chairs
-10/10/16 Batteries replaced in all Mich sensors
- 10/12/16 Batteries replaced in all TI sensor tags

### Jacobs Hall


- ~~ML-100 - B8:AE:ED:74:09:3D was port 10D-120C-03F10-D room 120~~
- BBB - port 10D-332-04F17-D Room 332
- BBB 54:4a:16:e0:8b:a1 10D-120C-03F10-D room 120
- BBB 6c:ec:eb:5c:64:5b Room 10 10D-10B-02f16-D

#### Room 110


- c0:98:e5:70:01:13 Type A 3D printer 10026 room 110
- c0:98:e5:70:01:22
- c0:98:e5:70:01:23 Type A 3D printer 10047 room 110
- c0:98:e5:70:01:25
- c0:98:e5:70:01:26 Laser 2 room 110C
- c0:98:e5:70:01:27 Type A 3D printer 10097 room 110
- c0:98:e5:70:01:29 Type A 3D printer 10213 room 110
- c0:98:e5:70:00:e2 Laser 1 room 110C
- c0:98:e5:70:00:e5 Type A 3D printer 10035 room 110
- c0:98:e5:70:00:d3 Type A 3D printer 10098 room 110
- c0:98:e5:70:00:d7 Type A 3D printer 10025 room 110
- c0:98:e5:70:00:f7 Type A 3D printer 10038 room 110
- c0:98:e5:70:00:db - Type A 3D printer 10094 room 110
- c0:98:e5:70:01:31 Type A 3D printer 10034 room 110


- c0:98:e5:30:00:57 room 110 by thermostst
- c0:98:e5:30:00:55 check placement in room

#### Room 332


- c0:98:e5:70:00:8a Carbon 3D printer room 332
- c0:98:e5:70:01:0c Dimension 2 (Bonnie) room 332
- c0:98:e5:70:01:2e Dimension 1 (Clyde) room 332


- c0:98:e5:30:00:55 room 120
- c0:98:e5:30:00:50 room 332 Fortus 380 air exhaust vent
- c0:98:e5:30:00:51 room 332 center of room


- c0:98:e5:90:00:85 room 332
- c0:98:e5:90:00:94
- c0:98:e5:90:00:87

#### Room 10C

- c0:98:e5:90:00:81 - wood shop room 10C


- c0:98:e5:30:00:62 room 10C Woodshop

**Operational Notes**

- Sensors installed, new batteries 7/15/16

### TAMU




There is also a Motion sensors placed on door. The format is JSON and provides three axis accelrometer, gyroscope, mangnometer and time stamp. The log for the sensor is:


The sensors have been placed in the graduate office space. The power blades are connected to power cords in use by students.

### Clark Kerr Campus

####Krutch Auditorium I3 network gateway BegaleBone Black, BLE gateway

**I3 Sensor Tags **
outside theater entrance in east hall (facing rm 102) 00-12-4b-00-0a:63:02:06 (short addr 9)
located adjacent to entrance by the stage 00-12-4b-00-0a-55-c3-02 (addr 6)
located rear wall of theater 00-12-4b-00-0a-4b-38-83 (addr 7)
mid west wall stage left 00-12-4b-00-0a-07-91-3c-82 (addr 4)

** BLEE**
c0:98:e5:30:00:ae - located adjacent to entrance by the stage
c0:98:e5:30:00:60 - located rear wall of theater
c0:98:e5:30:00:ad - mid wall stage left

** Blink**
c0:98:e5:90:00:98 - located adjacent to entrance by the stage
c0:98:e5:90:00:83 - located rear wall of theater
c0:98:e5:90:00:16 - mid wall stage left

####Clark Kerr Room - 102
uhkbbb010 - - BLE gateway

** I3 Sensor Tag**
on wall by south entrance door 00-12-4b-00-0a-0c-31-b0-01 (addr 12)
on wall facing north entrance door 00-12-4b-00-0a-4a-b9-05 (addr 5)

c0:98:e5:30:00:a6 - on wall facing south entrance door
c0:98:e5:30:00:a7 - on wall facing north entrance door

** Blink**
c0:98:e5:90:00:2d -on wall facing south entrance door
c0:98:e5:90:00:2c - wall north facing entrance door

####Room 104

c0:98:e5:90:00:1b - West Wall
c0:98:e5:90:00:17 - East Wall
c0:98:e5:30:00:2f - West Wall
c0:98:e5:30:00:a9 - East Wall

**I3 Sensor Tag**
00-12-4b-00-0c-2d-41-05 (addr ?) west Wall
00-12-4b-00-0c-29-b2-84 (addr ?) East Wall

#### Outside Entrance to Room 104 - facing up hallway
**I3 Sensor Tag**
00-12-4b-00-0c-31-b0-01 (addr ?)
** Blink**

#### Entrance Lobby

**I3 Sensor Tag**
On Wall facing entrance doors 00-12-4b-00-0a-4a-58-02 (addr 8)

#### Room 203 - inside by main doors
**I3 Sensor Tag**
00-12-4b-00-0c-31-61-01 (addr ?)
c0:98:e5:30:00:a(?) - need to get address

#### Room 204 - East Door
**I3 Sensor Tag**
00-12-4b-00-0c-2a-b8-01 (addr )

### Unassigned BBB Ready for deployment b0:d5:cc:83:0b:01 88:c2:55:83:6c:29

### Sensors available for deployment