From 07/07/2016 to 08/05/2016
- 04:24 PM Bug #36 (Closed): Error 409
- 2016-08-05 18:22:11.731784 -0500 mqtt-gdp-gateway: cannot log MQTT message for device/PowerBlade/c098e57000a8 (nrecs ...
- 09:17 AM Bug #35 (Closed): EP Crypto Error
- Saw this error today. Had to restart the program. Reporting for your information
EP Crypto Error: cannot clone mes...
- 02:03 PM Feature #33: Mailing list for GDP Users
- Setting an email gateway is a separate issue than a mailing list. To keep track of things, I created it as a separate...
- 01:55 PM Feature #33: Mailing list for GDP Users
- It would be a pity if a email/bughandler gateway did not work.
I had bugzilla set up to handle email in 2004 on th...
- 01:43 PM Feature #33: Mailing list for GDP Users
> BTW - I tried replying to the email that was sent from Eric's update of this issue and it looks like the issu...
- 01:36 PM Feature #33: Mailing list for GDP Users
- Ok, I'm watching for all events, and the two GDP forums. If someone adds a forum, hopefully watching all events will...
- 01:21 PM Feature #33: Mailing list for GDP Users
- For Forums, select a Forum of interest and then click "Watch" in the upper right-hand corner.
For Issues, you can ...
- 11:53 AM Feature #33: Mailing list for GDP Users
- This would primarily be users posting queries that might end up as being tickets. There might also be some develope...
- 11:21 AM Feature #33: Mailing list for GDP Users
- Could you clarify the nature of this mailing list? I see a few different categories:
1. Developer to developer com...
- 09:49 AM Feature #33 (New): Mailing list for GDP Users
- We need a mailing list for GDP users and https://gdp.cs.berkeley.edu/redmine/projects/gdp and https://gdp.cs.berkeley...
- 08:59 PM Bug #32: Router not allowing gdplogd to connect
- Eric Allman wrote:
> This looks like the Zeroconf problem I fixed this morning (nothing to do with the router). Unl...
- 07:14 PM Bug #32: Router not allowing gdplogd to connect
- This looks like the Zeroconf problem I fixed this morning (nothing to do with the router). Unless you are talking ab...
- 03:47 PM Bug #28: gdplogd losing connection to the router. signature write failure: Success
- Here's how to reproduce this:
1. Start `gdplogd`.
2. Use the visualization tool at http://gdp.cs.berkeley.edu:888...
- 11:51 AM Bug #28: gdplogd losing connection to the router. signature write failure: Success
- The Zeroconf part of this is resolved (see issue #30). The signature write failure part is still open.
- 03:29 PM Bug #32 (Closed): Router not allowing gdplogd to connect
- Here's a full run of the gdplogd
[Tue Aug 2 15:23:08 PDT 2016] starting
- 01:44 PM Feature #31 (Closed): Systemd debian packaging scripts for log-server
- 01:43 PM Bug #21: "500: internal server error" in the visualization tool.
- **Workaround:** if using with `systemd` with something like this:
- 11:50 AM Bug #30 (Resolved): Zeroconf lookup hangs on reconnect attempt
- Fixed. The problem was that the Zeroconf code was leaving global state around that confused later calls.
- 11:48 AM Bug #30 (Closed): Zeroconf lookup hangs on reconnect attempt
- If a router goes down, the client (in this case including gdplogd) will attempt to re-connect. If it tries Zeroconf,...
- 03:22 PM Bug #29 (In Progress): Internal Server Error
- This looks like it may be a new bug. It looks related to the "out of sync" errors that I've already seen and thought...
- 02:06 AM Bug #29 (Closed): Internal Server Error
- Suddenly started getting the following error on my log
2016-07-31 03:56:24.341231 -0500 motion-net-writer: _gdp_req...
- 06:05 PM Bug #28: gdplogd losing connection to the router. signature write failure: Success
- Just a hunch, but I wonder if this might be related to Issue #9 (Router terminating connections abruptly). I say thi...
- 05:07 PM Bug #28 (Closed): gdplogd losing connection to the router. signature write failure: Success
- The relevant error message in the logs (running at *=20)
*** Processing command 70=CMD_READ from socket 10
- 01:33 PM Feature #13 (Resolved): Flushing administrative output
- Fixed in commit:1241e33.
- 11:27 AM Bug #27 (New): Inconsistency in location of secret keys for mqtt-gdp-gateway
- In `gdp/gdp_crypto.c` the search path for reading secret keys is:
- 08:52 AM Bug #10 (Closed): Document / auto-configure the CRYPTOROOT option.
- No feedback for two weeks, so I'm assuming this has been adequately addressed. Marking as closed.
- 08:50 AM Bug #11 (Closed): No avahi package in homebrew (Mac OS X)
- No feedback for two weeks, so I'm presuming this fix is deemed adequate. Marking as closed.
- 07:52 PM Bug #26 (New): Documentation about administrative parameters in the wrong place
- Currently here source:doc/gdp-server-admin.md, however this list is not just limited to server administration
- 06:07 PM Feature #25 (New): Can't create a subscription that starts in the future
- It isn't possible to create a subscription that starts sometime in the future. For example, if a log has 80 records,...
- 03:05 PM Feature #24 (New): Key-value store CAAPI: split data log and index log
- If the data log and index log are separate, it enables one to use preexisting logs for the CAAPI. Also, the same data...
- 02:55 PM Feature #23 (On Hold): Android support
- Long Le reports that using Java (and JNA) works easily enough on Android. It'd be nice to have the already *sort of* ...
- 09:49 AM Bug #17 (Feedback): Issue with gcl-create and log subscription
- I believe this was fixed with commit:555a2264 (Kaz found and fixed this). Metadata wasn't retained with the in-memor...
- 08:53 AM Bug #22: Darwin: Compiling ep fails: EVP_DigestSignFinal not found
- Mea culpa. Some time back I updated the ep Makefile so that it would be more like the others (in particular, using t...
- 08:29 AM Bug #22: Darwin: Compiling ep fails: EVP_DigestSignFinal not found
- Here's a diff that fixes it for me
diff --git a/ep/Makefile b/ep/Makefile
index 11b3626..7ee2e30 100644
- 08:27 AM Bug #22: Darwin: Compiling ep fails: EVP_DigestSignFinal not found
- I'm not sure how to reopen a bug in RedMine. The Status field shows "Closed" and has no way to edit it.
Not a bi...
- 07:32 AM Bug #22 (Closed): Darwin: Compiling ep fails: EVP_DigestSignFinal not found
- It turns out that LIBSEARCH was supposed to do this but, due to a cut-and-paste error, the Makefile was using -I inst...
- 06:42 AM Bug #22 (Closed): Darwin: Compiling ep fails: EVP_DigestSignFinal not found
- Under Darwin, running make in gdp/ep fails because /opt/local/lib/libcrypto.dylib is not used at link time
How to ...
- 04:07 PM Bug #14: GDP logging
- I *think* I found a race condition that would explain this, but I had trouble when I tried to deploy the fix. I'm te...
- 02:43 PM Bug #14 (In Progress): GDP logging
- Caused two days of data to be lost from sensors deployed in Berkeley. Eric currently working on this
- 03:50 PM Bug #20 (Closed): size_t vs ssize_t for evbuffer_copyout
- Changed it to return 0 instead of -1 on error. The error can only occur if you have called `evbuffer_freeze` on it, ...
- 02:02 AM Bug #20 (Closed): size_t vs ssize_t for evbuffer_copyout
- `evbuffer_copyout` returns a type of `ev_ssize_t`, which maps to `ssize_t` allowing for signed values. It returns *th...
- 02:41 PM Bug #19 (Closed): Error handling in web-visualization for sensor nodes
- partial fix for #21 fixes this as well. Closing for now.
- 02:39 PM Bug #21 (In Progress): "500: internal server error" in the visualization tool.
- 02:19 PM Bug #21: "500: internal server error" in the visualization tool.
- commit:32a0a36 fixes the issue "500: internal server error" and provides a more meaningful result, i.e. empty set on ...
- 01:42 PM Bug #21 (Closed): "500: internal server error" in the visualization tool.
- Example URL with the issue: http://gdp.cs.berkeley.edu:8888/datasource?logname=edu.berkeley.eecs.swarmlab.device.c098...
- 02:25 PM Bug #19 (Closed): Error handling in web-visualization for sensor nodes
- The web-visualization currently does not handle any erroneous situations from the GDP data sources (no-data, or any e...
- 09:50 AM Bug #17 (Closed): Issue with gcl-create and log subscription
- Filing on behalf of *Nima*:
I noticed that these seems to be an issue with gcl-create and log subscription. I'm ab...
- 09:26 AM Bug #16 (Closed): Threaded GDP Clients Fail
- On behalf of *Rico*:
I've been doing experiments for our "central" service that I've mentioned before. Currently, ...
- 09:22 AM Bug #15 (Closed): Assertion error in Python API
- From *Nima Mousavi*: *I'm facing some issues while trying to access GDP logs. I got the following error, but the issu...
- 04:08 PM Bug #14 (Closed): GDP logging
- The mqtt-gdp-gateway starts returning the follwoing error randomly after logging data for some time.
- 08:27 PM Feature #13 (In Progress): Flushing administrative output
- 08:27 PM Feature #13: Flushing administrative output
- I guess I had assumed that this was line buffered, but that was a bad assumption. Another point: it should also lock...
- 08:21 PM Feature #13 (Closed): Flushing administrative output
- There ought to be a `fflush(fp);` at source:gdplogd/logd_admin.c#L229
This ensures that all the data from a single c...
- 07:20 PM Bug #12 (Closed): Connection reset for clients
- *Summary:* followed by a `Connection reset by peer` error, everything fails. Router process is verified to be running...
- 01:45 PM Bug #11 (Feedback): No avahi package in homebrew (Mac OS X)
- I updated the documentation to make this clear and added a compile flag to make it easier to compile Zeroconf out. I...
- 12:58 PM Bug #10 (Feedback): Document / auto-configure the CRYPTOROOT option.
- Changed Makefiles to always search /usr/local and /opt/local, completely eliminating CRYPTOROOT. Fixed in commit:475...
- 11:35 AM Document: PCARI visit, July 11th 2016
- 09:41 AM Bug #5 (Closed): libs directory should not be in git; "make all" should create it
- Christopher has confirmed that this works on RedHat
- 03:10 PM Bug #11 (Closed): No avahi package in homebrew (Mac OS X)
- It seems that there's no avahi package in home brew. I didn't see a good way to install avahi from source, as it appe...
- 01:31 PM Bug #10 (Closed): Document / auto-configure the CRYPTOROOT option.
- Naively installing on Mac OS X using brew, I got errors that openssl couldn't be found:
Also available in: Atom